The main products are cast iron slurry valve, cast steel knife gate valve, stainless steel knife gate valve, ceramic knife gate valve, polyurethane knife gate valve, fluorine-lined knife gate valve, rubber-lined knife gate valve, double-slide valve, penetrating plate valve, mineral slurry valve, gate Various non-standard customized knife gate valve series products.
Yingbei Valve
Product center
Electric knife gate valve
PZ973H, W, Y, TC, X, F, PU
Electric (rising rod) knife gate valve
■ Product overview
Denso-driven knife gate valve uses DZW multi-turn electric device to drive and control the opening and closing of the gate. The operator can control the valve remotely in the control room or manually operate it on site, or it can be automatically controlled with a computer.
■ Control instructions
Denso needs to strictly refer to the wiring diagram manual to switch to the control box control, and can choose three-phase 380V (50Hz), 660V (50Hz, 60Hz), 220V (50Hz, 60Hz) and other designated power sources. Refer to the Denso instruction manual for the control steps.
■ Knife gate valve related parameters
Sealing structure: one-way sealing, two-way sealing
Valve structure: open-plate bright rod, dark-plate bright rod, penetrating type, two-way opening
Support form: triangle type, four-column type, steel plate type, concealed plate type, arch bridge type (unique structure)
Connection form: Wafer, flange
Nominal diameter: DN50~DN3000 NPS 2”~120” (non-standard customized)
Working temperature: ≤1000℃ (The specific temperature resistance depends on the selected material)
Nominal pressure: 0.6Mpa, 1.0Mpa, 1.6Mpa, 2.5Mpa, 5K, 10K, 150LB
Actuating mechanism: hand wheel, pneumatic, hand pneumatic, electric, electro-hydraulic, hydraulic, bevel gear, sprocket, lever
■ Knife gate valve seal selection guide
| Seal type | Valve seat material | temperature | Applicable medium and characteristics | Not applicable |
| hard dense seal up |
STL |
≤500 |
The hardness of cemented carbide is 93HRA, which is suitable for various granular medium pipelines, and has strong wear resistance and is not easy to deform. | Hard seals are not suitable for pipelines with gas and liquid content media, and hard seals have large leakage and poor sealing performance (Grade D). It is not recommended to use in micro-medium pipelines and working conditions that do not allow internal leakage of gas, liquid, etc. |
|
TC |
≤300 |
Ceramics have extremely high wear resistance, corrosion resistance and erosion performance, and are suitable for various high-strength particulate media pipelines, such as cinder, coal powder, and high-concentration ore slurry. | ||
|
507 |
≤425 |
The metal seal is suitable for various medium and low-strength media working conditions, such as slag-water mixture, dust, materials, etc. | ||
| soft dense seal up |
NBR |
≤80 |
Nitrile nitrile rubber is suitable for various gas and liquid media pipelines, with good oil resistance and good abrasion resistance. | It is not recommended to be used in pipelines with particles or solid media. The medium can easily damage the worn rubber body. |
|
EPDM |
≤150 |
EPDM rubber is suitable for all kinds of gas and liquid media pipelines, with good acid and alkali resistance and excellent wear resistance. | ||
|
PTFE |
≤200 |
PTFE rubber is suitable for all kinds of gas and liquid media pipelines, with excellent acid and alkali resistance and excellent wear resistance. | ||
|
PU |
≤120 |
Polyurethane has a hardness of 95HRA, has oil resistance, abrasion resistance, and low temperature aging resistance. Its characteristics are extremely abrasion resistant, and it has good resilience and excellent sealing performance. It is suitable for various mixed media pipelines containing gas, liquid and particulate materials, and the mixed use is 100% leaking. | It is not recommended to be used in pipelines with particles or solid media. The medium can easily damage the worn rubber body. | |
■ Selection criteria for knife gate valve
Design and manufacturing standards: JB/T 8691-2013, MSS SP-81
Structure length standard: GB/T 15188.2-1994-J21, MSS SP-81
Flange connection standards: GB/T 79, ASME B16.5, GB/T9113.1-2000
Pressure test standard: JB/T 8691, MSS SP-81
Ram grinding standard: GB/T 1184-1996 (level 12)
Valve seat fine plus standard: GB/T 1184-1996 (level 11)
Valve stem specifications: JB/T 8691-2013
Stud bolt standard: GB899-76
Product identification standard: GB/T12220
Supply standard: JB/T7928
■Knife gate valve material standard
| Selection standard of valve body and parts materials | |||
| Part Name | Material name | Material designation | National Standard Number |
|
Valve body |
Ductile iron |
QT450-10 |
GB/T 12227 |
| Carbon steel |
WCB、A305 |
GB/T 12228、GB/T 12229 |
|
| Austenitic stainless steel |
CF8、CF3、CF8M、CF3M、310S |
GB/T 12230、GB/T 4237 |
|
|
304、304L、316、316L |
ASTM A182:2007、ASTM A240:2007 |
||
|
Valve plate |
Austenitic stainless steel |
304、304L、316、316L |
ASTM A240:2007 |
|
06Cr19Ni10、22Cr19Ni10、06Cr17Ni12Mo2 |
GB/T 4237 |
||
| Stem | Stainless steel round bar |
304、304L、316、316L |
ASTM A479:2008 |
| Bracket | Carbon steel |
WCB |
GB/T 12229 |
|
Q235 |
GB/T 700 |
||
| Stem nut | Copper alloy |
ZcuZn38Mn2Pb2、ZcuSn5Pb5Zn5 |
GB/T 12225 |
| Nickel-containing cast iron |
D-2 |
ASTM A439:83(2009) |
|
| Packing seal | Graphite braided packing |
- |
JB/T7370-1994 |
| Seat seal | PTFE |
- |
HG/T 2903 |
| rubber | Fluorine rubber, nitrile butadiene rubber, EPDM rubber |
- |
|
| Handwheel | Carbon steel |
25、Q235A |
GB/T 699、GB/T 700 |
| Ductile iron |
QT400-15、QT450-15 |
GB/T 12227 |
|
Messages
WRITE A MESSAGE TO US
Service hotline
Contact: Mr. Ji
Address: Oubei Industrial Zone, Yongjia County, Zhejiang Province
E-mail: 510146783@qq.com
Website: http://www.yingbeiv.com
Focus on us
© 2021 Zhejiang Yingbei Valve Co., Ltd All rights reserved. Powered by www.300.cn 浙ICP备18028570号-1